pumpcalc

Valve and Pump Material Equivalents

EN to ASTM equivalents for the materials most often named on valve and pump datasheets: cast carbon steel, cast stainless steel, grey iron and ductile iron. Use this table to read a European material grade and find its nearest ASTM counterpart.

“Equivalent” is approximate. The EN and ASTM grades in this table do not have fully identical chemistry and mechanical requirements, so one cannot simply be swapped for the other — any substitution needs engineering confirmation against the governing standard and the manufacturer’s data.

GB equivalents are being added: the GB column below is intentionally blank (shown as “—”) until each grade has been verified against a GB standard. No GB grades are listed here yet.

Showing 9 of 9 materials.
EN numberEN gradeASTM equivalentGB equivalentTypeCommon useNote
1.0619GP240GHA216 WCB—Cast carbon steelGeneral-purpose cast steel valves and pumps—
1.4308GX5CrNi19-10A351 CF8—Cast stainless steel (304 type)Corrosive service, food and chemical duty—
1.4408GX5CrNiMo19-11-2A351 CF8M—Cast stainless steel (316 type)Chloride-bearing and chemical service—
EN-JL1040EN-GJL-250A48 Class 40B (KSB); valve industry also uses A126 Class BSources disagree—Grey cast ironLow-pressure water valves and pump casingsSources disagree: KSB lists A48 Class 40B; valve-industry references commonly list A126 Class B. Both are shown.
EN-JS1030EN-GJS-400-15A536 60-40-18 (KSB); other sources list 65-45-12Sources disagree—Ductile ironWater and wastewater valves, pump casingsSources disagree on the ASTM grade (60-40-18 vs 65-45-12). Both are shown.
EN-JS1025EN-GJS-400-18-LTA536 60-40-18—Ductile iron (low temperature)Low-temperature water service—
1.4301X5CrNi18-10304—Stainless steelGeneral stainless trim and shaftsCommon correspondence, not separately checked.
1.4401X5CrNiMo17-12-2316—Stainless steelCorrosive service trim and shaftsCommon correspondence, not separately checked.
1.4404X2CrNiMo17-12-2316L—Stainless steelWelded stainless componentsCommon correspondence, not separately checked.

Data checked 2026-11-12. The CSV download contains the rows currently shown.

Two rows are marked “Sources disagree”: EN-GJL-250 and EN-GJS-400-15. For those, the table shows both published ASTM equivalents with their sources instead of picking one side. The three wrought stainless rows (304, 316, 316L) are common correspondences that were not separately checked against a source table, and are labelled as such.

Sources

Data checked 2026-11-12. Standards: EN 10213, ASTM A216 / A351 / A48 / A536.

Material equivalents are approximate: chemistry and mechanical requirements differ between the EN and ASTM grades, and substitution needs engineering confirmation. For preliminary estimates only. Verify against manufacturer data and the governing standard before purchase or installation.

Reviewed by pumpcalc · Last updated 2026-11-17